LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-30 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (1 Of 4) >> DTC P0088-00: Fuel Pressure Sensor Circuit Range/Performance Problem >> Details On DTCs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Details On DTCs

DTC P0088:00 (PCM, SKYACTIV-G) DETECTION CONDITION AND POSSIBLE CAUSE

Description Fuel pressure sensor circuit range/performance problem
Detection condition Determination conditions
  • The actual fuel pressure becomes higher than the target fuel pressure by 1.2 MPa {12 kgf/cm2 , 174 psi} while the fuel pressure feedback amount is maintained high.
Preconditions
  • Engine speed: 500 rpm or more*1
  • The following DTCs are not detected:
    • Fuel pressure sensor: P0089:00, P0192:00 and P0193:00
      • High pressure fuel pump: P0091:00 and P0092:00
*1 : Standard can be verified by displaying PIDs using M-MDS
Malfunction determination period
  • 5 s period
Drive cycle
  • 1
Self test type
  • CMDTC self test
Sensor used
  • Fuel pressure sensor
Fail-safe function
  • Limits intake air amount
  • Stops high pressure fuel pump control
Vehicle status when DTCs are output
  • Not applicable
Possible cause
  • High pressure fuel pump connector or terminals malfunction
  • Fuel pressure sensor connector or terminals malfunction
  • PCM connector or terminals malfunction
  • Fuel pressure sensor malfunction
  • Fuel injector malfunction
  • High pressure fuel pump malfunction
    • Relief valve (built-into high pressure fuel pump) malfunction
  • PCM malfunction