Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PIDs APP1 and APP2. (See PID/DATA MONITOR INSPECTION .)
- Compare the voltage and opening angle indications for the PIDs APP1 and APP2 with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD VOLTAGE SPECIFICATION
| Condition/ | APP1 | APP2 | ||
|---|---|---|---|---|
| V | % | V | % | |
| Accelerator pedal released | Approx. 0.75 | Approx. 15 | Approx. 0.38 | Approx. 7.45 |
| Accelerator pedal depressed | Approx. 4.52 | Approx. 90.58 | Approx. 2.26 | Approx. 45.49 |