October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
PID/DATA Monitor Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Access and monitor the PID/DATA monitor item EX_SHUT_VLV_ACT and simulation item EX_SHUT_VLV_DSD. (See PID/DATA MONITOR INSPECTION
.) (See SIMULATION INSPECTION
.)
- Verify that the EX_SHUT_VLV_ACT PID value increases linearly, while increasing the opening angle of the exhaust shutter valve using the active command mode function of EX_SHUT_VLV_DSD.
- If the EX_SHUT_VLV_ACT PID does not increase according to the exhaust shutter valve opening angle, inspect the exhaust shutter valve. (See EXHAUST SHUTTER VALVE INSPECTION
.)
- If the EX_SHUT_VLV_ACT PID increases increase linearly according to the exhaust shutter valve opening angle, the exhaust shutter valve is normal.