Blind Spot Monitoring (BSM) Control Module (RH)

-: Not applicable

PID/DATA MONITOR (BLIND SPOT MONITORING CONTROL MODULE - RH)

PID	Unit/Operation	Data contents	Module control terminal
A_ALGN_POS_R	-	Displays the corrected angle radar (RH) auto correction.	-
A_ALGN_ST_C_R	Non completion/Completion	Non completion: Radar (RH) auto correction is not completed. Completion: Radar (RH) auto correction is completed.	-
IL_MODE	Off/On	NOTE: Displays in the M-MDS but it does not operate.
OP_BRT_R	-	Displays the blind spot monitoring (BSM) warning indicator light (RH) output brightness.
SHIFT_R	Not_R/R	NOTE: Displays in the M-MDS but it does not operate.
SWA_POS	° (deg)	NOTE: Displays in the M-MDS but it does not operate.
VPWR_IG1	V	Displays blind spot monitoring (BSM) control module (RH) power supply voltage	I (Power position (IG1))
VSPD	KPH, MPH	Displays vehicle speed	C (MS-CAN_H) D (MS-CAN_L)
WRN_IND_R	Off/On	Off: Blind spot monitoring (BSM) warning light (RH) is not illuminated. On: Blind spot monitoring (BSM) warning light (RH) is illuminated.	G (Blind spot monitoring (BSM) warning light signal (RH))