DTC C0061-28/C0061-64/C0062-28/C0062-64/C0063-28/C0063-64: SAS Control Module System: Notes

DTC C0061:28/C0061:64/C0062:28/C0062:64/C0063:28/C0063:64 (DYNAMIC STABILITY CONTROL) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0061:28, C0061:64, C0062:28, C0062:64, C0063:28, C0063:64	SAS control module system
DETECTION CONDITION		NOTE: The low-G sensor and the yaw rate sensor are built into the SAS control module. C0061:28, C0061:64 Out-of-specification signal modulation or lateral-G value is detected from the low-G sensor. C0062:28, C0062:64 Out-of-specification signal modulation or longitudinal-G value is detected from the low-G sensor. C0063:28, C0063:64 Out-of-specification signal modulation or yaw rate value is detected from the yaw rate sensor.
FAIL-SAFE FUNCTION		Refer to "DTC Table" and "Fail-safe Function Malfunction Contents". (See DTC TABLE .)
POSSIBLE CAUSE		SAS control module malfunction DSC HU/CM malfunction Poor connection at connectors (female terminal)
SYSTEM WIRING DIAGRAM		-