September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Charging system warning Light
- Verify that the battery is fully charged.
- Verify that the assembly condition of the drive belt is correct. (See DRIVE BELT INSPECTION
.)
- Switch the ignition ON, verify that the charging system warning light illuminates.
- If it does not illuminate, inspect the charging system warning light and the wiring harness.
- If the charging system warning light and the wiring harness are normal, inspect the PCM.
- Verify that the charging system warning light turns off after the engine is started.
- If the charging system warning light does not turn off, perform the DTC inspection, then perform troubleshooting according to the corresponding diagnostic procedure. (See ON-BOARD DIAGNOSTIC TEST
.) (See DTC TABLE
.)