DTC B14F2-54: The Configuration Data For The Body Control Module (BCM) Was Not Received [Vehicle Control Module]: Outline
DTC B14F2:54 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
The configuration data for the body control module (BCM) was not received. |
| Detection condition |
- The vehicle control module (VCM) detects that the rear side radar sensor cannot receive the configuration data from the body control module (BCM) for 10 s.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)]
.) |
| Possible cause |
- Malfunction in CAN communication line between body control module (BCM) and rear side radar sensor
- Configuration data of body control module (BCM) and rear side radar sensor is not matched
- Inappropriate rear side radar sensor replacement procedure
- Body control module (BCM) configuration data write error
- Configuration not completed after rear side radar sensor replacement
- Rear side radar sensor (RH) malfunction
- Rear side radar sensor (LH) malfunction
- Body control module (BCM) malfunction
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |