DTC B14F3-55: Body Control Module (BCM) Configuration Not Performed [Vehicle Control Module]: Outline

DTC B14F3:55 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Body control module (BCM) configuration not performed
Detection condition	The vehicle control module (VCM) detects that the driver monitoring camera unit received a signal which indicates the body control module (BCM) configuration was not performed for 10 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
Possible cause	Malfunction in CAN communication line between body control module (BCM) and driver monitoring camera unit Inappropriate driver monitoring camera unit replacement procedure Configuration data of body control module (BCM) and driver monitoring camera unit not matched Body control module (BCM) configuration data write error Configuration not performed after driver monitoring camera unit replacement Driver monitoring camera unit malfunction Body control module (BCM) malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable