DTC U0428-68: Error Signal Received From Steering Angle Sensor [Vehicle Control Module]: Outline
DTC U0428:68 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from steering angle sensor |
| Detection condition |
- The vehicle control module (VCM) receives an error signal from the steering angle sensor.
- The vehicle control module (VCM) detects that a difference between the angle signal received from the steering angle sensor and the angle signal received from the EPS control module is 180° or more.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)] .) |
| Possible cause |
- Steering angle sensor malfunction
- EPS control module malfunction
- Steering angle signal error
- Vehicle control module (VCM) malfunction (built into body control module
(BCM))
- Body control module (BCM) malfunction
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |