LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 3 Select, 4D Hatchback, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> On-Board Diagnostic - Vehicle Control Module (2 Of 2) >> DTC U2125-00: Communication Error With Driver Monitoring Camera Unit [Vehicle Control Module] >> Outline
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U2125-00: Communication Error With Driver Monitoring Camera Unit [Vehicle Control Module]: Outline

DTC U2125:00 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Communication error with driver monitoring camera unit
Detection condition
  • The vehicle control module cannot receive CAN signal from the driver monitoring camera unit for 10 s.
Fail-safe (See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
Possible cause
  • Power is not supplied from vehicle control module (VCM) to driver monitoring camera (built into center display)
  • Malfunction in CAN communication line between vehicle control module (VCM) and driver monitoring camera unit
  • Driver monitoring camera unit malfunction
  • Vehicle control module (VCM) malfunction (built into body control module (BCM))
System wiring diagram Not applicable