PID/Data Monitor Table [Telematics Communication Unit]

PID/DATA MONITOR DESCRIPTION [TELEMATICS COMMUNICATION UNIT]

PID	Unit/Operation	[Data contents	Module control terminal
ALRM_NOTIFIC	OFF/ON	OFF: Alarm notification setting is off. ON: Alarm notification setting is on.	-
BACKUP_BATT_STAT	V	Displays built-in battery voltage.	-
CELLULAR_ACCOUNT	OFF	Usable phone number is not registered.	-
DIGITAL_NETWORK_NUM	-	Displays telematics communication unit phone number	-
EMERGENCY_CALL	OFF/ON/None	OFF: Emergency call function is not activated. ON: Emergency call function is activated. None: Emergency call function has a malfunction	-
EMERGENCY_CALL_NUM	-	Displays emergency call number.	-
FOTA_PROGRESS	%	Reads out during FOTA execution, and displays rate of FOTA implementation progress.	-
GNSS_ALTITUDE	m	Displays sea level altitude received from GNSS	-
GNSS_GALILEO_NUM	-	Displays number of all Galileo satellites receiving position information	-
GNSS_GLONASS_NUM	-	Displays number of all GLONASS satellites receiving position information	-
GNSS_GPS_NUM	-	Displays number of all GPS satellites receiving position information	-
GNSS_LATITUDE	milliarc seconds	Displays altitude received from GNSS	-
GNSS_LONGITUDE	milliarc seconds	Displays longitude received from GNSS	-
GNSS_UTC	sec	Displays coordinated universal time	-
GNSS_VELOCITY	km/h	Displays vehicle speed detected from GNSS	-
IG_STAT	OFF/ON	OFF: IG1 power supply voltage is low. ON: IG1 power supply voltage is high.	1AE
IMEI	-	Displays telematics communication unit identification number	-
IMSI	-	Displays stored IMSI No.	-
LOCATION_INFO	Off/ON	OFF: Location information setting is off. ON: Location information setting is on.	-
OPERAT_MONITOR	OFF/ON	OFF: Operation monitoring service is not usable. ON: Operation monitoring service is usable.	-
POWER_MODE	OFF/ACC/ON/CRANK	OFF: Body control module (BCM) controls ignition switch off (lock). ACC: Body control module (BCM) controls ignition switch ACC. ON: Body control module (BCM) controls ignition switch ON (engine off). CRANK: Body control module (BCM) controls cranking at ignition switch ON.	-
RECALL_NOTIFIC	OFF/ON	OFF: Recall notification setting is off. ON: Recall notification setting is on.	-
REMOTE_CHECK	OFF/ON	OFF: Remote check setting is off. ON: Remote check setting is on.	-
REMOTE_CTRL	OFF/ON	OFF: Remote control setting is off. ON: Remote control setting is on.	-
REMOTE_SERVICE	OFF/ON/None	OFF: Remote service is not contracted. ON: Remote service is contracted. None: Contract of remote service is failed.	-
RESULT_CALL_HIST	Complete/Fail/Intermit/Emergency Call/No Member Registration	Displays final results of call	-
RUSSIAN_VIN		Displays SKD vehicle-specific Russia VIN assembled at export destination	-
SET_DATE	date	Displays set date for upload file used by connected service function	-
SET_HOUR	hour	Displays set GMT time for upload file used by connected service function	-
SET_MINUTE	minutes	Displays set GMT minutes for upload file used by connected service function	-
SET_MONTH	month	Displays set GMT month for upload file used by connected service function	-
SET_SECOND	seconds	Displays set GMT seconds for upload file used by connected service function	-
SET_YEAR	year	Displays set year for upload file used by connected service function as 2 digits (00) for year 2000	-
SIM_EXPIRED_DATA	sec	Displays time elapsed after specified time from SIM shipping date has elapsed	-
SIM_INFO	-	Displays specific number attached to SIM card	-
SIM_SIPPING_DATA	sec	Displays SIM shipping date which becomes standard for determining SIM expiration	-
SOFT_NUM		Displays software version of NAD (communication module) in telematics communication unit	-
SUMMER_TIME	Off/On	Off: Daylight savings time is not detected On: Daylight savings time is detected	-
TCU_FLAG	OFF/ON/None	OFF: Telematics communication unit is not contracted. ON: Telematics communication unit is contracted. None: Contract of telematics communication unit is failed.	-
TCU_MODE	Development Mode/Factory Mode/Market Mode	Indicates current mode for telematics communication unit.	-
TEL_ANT_LVL	-	Displays reception signal level of TEL antenna (displays in 5 stages).	2A
TEL_ANT_LVL_RAW	dBm	Displays reception signal level of TEL antenna.	2A
TEL_NUM_FLAG	OFF/ON/Invalid/Fail	OFF: Phone number is not written. ON: Phone number is written. Invalid: Phone number is written but invalid. fail: Failed to write the phone number.	-
TEL1_ANT_3LVL	-	Displays radio field strength of TEL antenna in 3 steps	-
TEL2_ANT_3LVL	-	Displays radio field strength of TEL antenna (sub) in 3 steps	-
TIME_DIF_RATE	Minus/Plus	Minus: Local time delayed more than GMT time. Plus: Local time advanced more than GMT time.	-
TIME_DIF_VALUE	Hour	Displays time difference relative to GMT time	-
TIME_SOURCE	CMU/TCU	CMU: Time specified by information from connectivity master unit (CMU) Time specified by telematics communication unit independently (including when it is not specified)	-
TRIGGER_TYPE	Automatic/Manual/Test (Automatic)/Test (Manua l)/Driver Abnormality	Automatic: Calls automatically. Manual: Calls manually. Test (Automatic): Local time delayed more than GMT time. Test (Manual): Calls automatically (test). Driver Abnormality: Local time advanced more than GMT time.	-
TRIGGER_TYPE_HIST	Automatic/Manual/Test (Automatic)/Test (Manual)	Automatic: Records call history automatically. Manual: Records call history manually. Test (Automatic): Records call history automatically (test). Test (Manual): Records call history manually (test).	-
VPWR	V	Displays voltage at telematics communication unit (power supply)	-
VPWR_MIC	V	Displays microphone power supply voltage.	1E