DTC U2030-46: Forward Sensing Camera (FSC) Calibration Data Parameter Error [Vehicle Control Module]: Outline
DTC U2030:46 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Forward sensing camera (FSC) calibration data parameter error |
| Detection condition |
- The vehicle control module (VCM) detects that the forward sensing camera (FSC) received error calibration data from the vehicle control module (VCM) for 10 s.
- The vehicle control module (VCM) detects a forward sensing camera (FSC) internal malfunction for 10 s.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)] .) |
| Possible cause |
NOTE:
- Depending on the module, after the ignition is switched ON (engine off or on) or OFF, there is a module that needs 30 s to correctly write the calibration data and configuration data.
- Calibration error after forward sensing camera (FSC) replacement
- The vehicle control module (VCM) or body control module (BCM) stores DTCs.
- Vehicle control module (VCM) or body control module (BCM) communication error or internal malfunction
- DTCs are stored in the forward sensing camera (FSC).
- CAN circuit communication error between vehicle control module (VCM) and forward sensing camera (FSC)
- Forward sensing camera (FSC) malfunction
- Vehicle control module (VCM) malfunction (built into body control module (BCM))
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |