DTC U2300-55: Body Control Module (BCM) Configuration Not Performed [Vehicle Control Module]: Outline
DTC U2300:55 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Body control module (BCM) configuration not performed |
| Detection condition |
- The vehicle control module (VCM) received a signal which indicates the body control module (BCM) configuration was not performed for 10 s.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)] .) |
| Possible cause |
- Inappropriate body control module (BCM) replacement procedure
- Configuration data of body control module (BCM) and vehicle control module (VCM) not matched
- Body control module (BCM) configuration data write error
- Configuration not performed after body control module (BCM) replacement
- Vehicle control module (VCM) malfunction (built into body control module (BCM))
- Body control module (BCM) malfunction
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |