Diagnostic Procedure
DTC U0416:82 [ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE (US)] DIAGNOSTIC PROCEDURE
| Step | Inspection | Results | Action |
|---|---|---|---|
| 1 | INSPECT DSC HU/CONTROL MODULE FOR MALFUNCTION
|
Yes | Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [DSC HU/CM (US)] .) |
| No | Go to the next step. | ||
| 2 | INSPECT DSC HU/CONTROL MODULE FOR MALFUNCTION DEPENDING ON REPEATABILITY
|
Yes | Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW (US) .) If the CAN communication is normal, replace the DSC HU/Control Module and perform the repair completion verification. (See DSC HU/CM REMOVAL/INSTALLATION [L.H.D. (US)] .) |
| No | Go to repair completion verification 2. | ||
| Repair completion verification 1 | VERIFY THAT VEHICLE IS REPAIRED
|
Yes | Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW (US) .) If the CAN communication is normal, perform the diagnosis from Step 1.
|
| No | Go to the next step. | ||
| Repair completion verification 2 | VERIFY IF OTHER DTC IS DISPLAYED
|
Yes | Repair the malfunctioning location according to the applicable DTC troubleshooting. |
| No | DTC troubleshooting completed. |