Function Inspection Using M-MDS
DIAGNOSTIC PROCEDURE - FUNCTION INSPECTION USING M-MDS
| Step | Inspection | Results | Action |
|---|---|---|---|
| 1 | PURPOSE: VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY
|
Yes | Perform repair or diagnosis according to the available information.
|
| No | Go to the next step. | ||
| 2 | PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION
NOTE:
|
- | Go to the next step. |
| 3 | PURPOSE: INSPECT FOR OTHER RELATED DTCs
|
Yes | Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [PCM (VINs 7, L, M (US)] .) Go to the next step. |
| No | Go to the next step. | ||
| 4 | PURPOSE: VERIFY BODY CONTROL MODULE (BCM) DTC
|
Yes | Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [BODY CONTROL MODULE (BCM) (US)] .) Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1. |
| No | Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1. |