LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Grand Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN Y) >> Engine Oil Temperature Sensor Inspection >> Resistance Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

  1. Turn the steering wheel to full right lock.
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Lift up the vehicle.
  4. Remove the front splash shield (RH). (See SPLASH SHIELD REMOVAL/INSTALLATION .)
  5. Disconnect the engine oil pressure sensor/engine oil temperature sensor connector. (See ENGINE OIL PRESSURE SENSOR/ENGINE OIL TEMPERATURE SENSOR REMOVAL/INSTALLATION .)
  6. Measure the resistance between engine oil pressure sensor/engine oil temperature sensor terminals E and C.
    G12232016Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals