Manual Mode Function Inspection
BASIC POWER WINDOW SYSTEM INSPECTION DESCRIPTION AND POSSIBLE CAUSE (MANUAL MODE)
| Step |
Inspection |
Action |
| 1 |
- Switch the ignition ON (engine off or on).
- Turn the power-cut switch to UNLOCK (contact point: Close).
- Does each door glass move up and down in manual mode using the power window sub switch?
|
Yes |
Go to the next step. |
| No |
- Inspect the following items:
- Power window main switch (power-cut switch system malfunction)
- Power window sub switch power supply fuses
- Power window sub switch ground wiring harness
- Power window sub switch power supply wiring harnesses
- Wiring harness between power window sub switch and power window motor
- Power window sub switch
- Repair or replace the malfunctioning part, then go to the next step.
|
| 2 |
- Does the driver-side door glass move up and down in manual mode using the power window main switch?
|
Yes |
Go to the next step. |
| No |
- Inspect the following items:
- Power window main switch power supply fuses
- Power window main switch ground wiring harness
- Power window main switch power supply wiring harnesses
- Wiring harness between power window main switch and power window motor
- Repair or replace the malfunctioning part, then go to the next step.
|
| 3 |
- Does each other door glass other than the driver-side door glass move up and down in manual mode using the power window main switch?
|
Yes |
Go to the next step. |
| No |
- Perform the power window initialization procedure for any door glass that does not move up and down, and reinspect. (See POWER WINDOW SYSTEM INITIALIZATION PROCEDURE
.)
- If it does not move up and down upon reinspection, inspect the following:
- Wiring harness between power window main switch and sub switch
- Repair or replace the malfunctioning part, then go to the next step.
|
| 4 |
- Turn the power-cut switch to LOCK (contact point: Open).
- Push/pull the power window main switch (switches for all windows in manual mode).
- Does only driver-side front door glass move up and down?
|
Yes |
- Manual mode function is normal.
- Go to the automatic mode function inspection.
|
| No |
Replace the power window main switch, then go to the automatic mode function inspection. (power-cut switch system malfunction) |