DTC C0051-67: EPS Control Module [Dynamic Stability Control (DSC)]: Notes

DTC C0051:67 [DYNAMIC STABILITY CONTROL (DSC)] DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0051:67	EPS control module
DETECTION CONDITION		DSC HU/CM receives steering angle neutral position reset signal after neutral position was set.
FAIL-SAFE FUNCTION		Refer to "Fail-safe Function Malfunction Contents". (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		EPS control module malfunction Signal errors from EPS control module due to rough road driving DSC HU/CM malfunction Poor connection at connectors (female terminal)
SYSTEM WIRING DIAGRAM		Not applicable