LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Manual Transaxle - Overhaul [C66M-R]) >> Precaution >> Service Caution >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Caution: Assembly

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before assembly, verify that each part is clean and dried.
  2. Apply a sufficient amount of the specified oil (SAE 75W-80, API service GL-4) to moving parts and sliding surfaces when performing assembly.
  3. For parts such as gaskets, springs, or pins which are designated for replacement with every disassembly, always use a new part.
  4. Clean off remaining silicone sealant before applying new silicone sealant.
  5. After applying silicone sealant, install the transaxle case before the applied silicone sealant starts to harden, and wait for 30 min or more before adding oil.
  6. When using a vise, always secure the component using an aluminum plate to prevent component damage.
scientia non olet · About LEMON Manuals