LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Manual Transaxle - Overhaul [C66M-R]) >> Secondary Shaft Component Assembly >> Synchronizer Key Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Synchronizer Key Assembly Note

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align with the direction of the synchronizer key as shown in the figure, and assemble the clutch hub.
    Fig 1: Identifying Synchronizer Key Aligning Position
    G08347889
  2. After the synchronizer key is assembled, verify that the detent ball of the synchronizer key is engaged with the positioning groove of the clutch hub sleeve.
    Fig 2: Identifying Positioning Groove Of Clutch Hub Sleeve
    G08347890
scientia non olet · About LEMON Manuals