LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Manual Transaxle - Overhaul [C66M-R]) >> Shift Control Module Disassembly >> Pin Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pin Removal Note

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure the shift control module in a vise.
    Fig 1: Securing Shift Control Module In Vise
    G08347822
  2. Mark the switch pin and interlock sleeve.
    NOTE:
    • The switch pin has a particular installation direction.
    Fig 2: Identifying Switch Pin And Interlock Sleeve Mark Position
    G08347823
  3. Remove the pin (switch pin) using a punch.
    Fig 3: Removing Pin (Switch Pin) Using Punch
    G08347824
  4. Move the shift lever to set the guide pin to the 5GR position of the guide plate.
    Fig 4: Identifying Guide Pin 5GR Position
    G08347825
  5. Remove the pin (control lever component) using a punch.
    Fig 5: Removing Pin (Control Lever Component) Using Punch
    G08347826
scientia non olet · About LEMON Manuals