Blind Spot Monitoring (BSM) Control Module (LH)
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
x: Applicable-: Not applicable
| DTC No. | Blind Spot Monitoring (BSM) OFF Indicator Light | Description | Fail-Safe | Drive Cycle | Self Test Type(1) | Memory Function | Refer To | ||
|---|---|---|---|---|---|---|---|---|---|
| B118C:11 | Illuminated | Blind spot monitoring (BSM) warning light (LH) circuit malfunction | x | - | C, D | x | (See DTC B118C:11 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| B118C:15 | Illuminated | Blind spot monitoring (BSM) warning light (LH) circuit malfunction | x | - | C, D | x | (See DTC B118C:15 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U0010:88 | Illuminated | Module communication error (MS-CAN) | x | - | C, D | x | (See DTC U0010:88/U0100:00/U0155:00/U0214:00 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U0100:00 | Illuminated | Communication error with PCM | x | - | C, D | x | |||
| U0155:00 | Illuminated | Communication error with instrument cluster | x | - | C, D | x | |||
| U0214:00 | Illuminated | Communication error with start stop unit | x | - | C, D | x | |||
| U0233:00 | Illuminated | Communication error with blind spot monitoring (BSM) control module (RH) | x | - | C, D | x | (See DTC U0233:00 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U0401:68 | Illuminated | Error signal received from PCM | x | - | C, D | x | (See DTC U0401:68 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U0420:68 | Illuminated | Error signal received from electric power steering (EPS) control module | x | - | C, D | x | (See DTC U0420:68 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U0423:68 | Illuminated | Error signal received from instrument cluster | x | - | C, D | x | (See DTC U0423:68 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U0513:68 | Illuminated | Error signal received from DSC HU/CM | x | - | C, D | x | (See DTC U0513:68 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U0515:68 | Illuminated | Error signal received from start stop unit | x | - | C, D | x | (See DTC U0515:68 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U2300:54 | Illuminated | Configuration data not received from instrument cluster | x | - | C, D | x | (See DTC U2300:54 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U2300:55 | Illuminated | Instrument cluster configuration not implemented | x | - | C, D | x | (See DTC U2300:55 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U2300:56 | Illuminated | Configuration data unmatched with instrument cluster | x | - | C, D | x | (See DTC U2300:56 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U2300:64 | Illuminated | Instrument cluster configuration error | x | - | C, D | x | (See DTC U2300:64 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U3000:01 | Illuminated | Electrical malfunction inside blind spot monitoring (BSM) control module | x | - | C, D | x | (See DTC U3000:01 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U3000:09 | Illuminated | Blind spot monitoring (BSM) control module internal malfunction | x | - | C, D | x | (See DTC U3000:09 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U3000:54 | Illuminated | Radar performance malfunction | x | - | C, D | x | (See DTC U3000:54 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U3000:97 | Illuminated | Radar performance malfunction | x | - | C, D | x | (See DTC U3000:97 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U3003:04 | Illuminated | Instrument cluster configuration error | x | - | C, D | x | (See DTC U3003:04 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U3003:16 | Illuminated | Blind spot monitoring (BSM) control module low power supply voltage input (less than 7.321 V) | x | - | C, D | x | (See DTC U3003:16 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
| U3003:17 | Illuminated | Blind spot monitoring (BSM) control module high power supply voltage input (15.608 V or more) | x | - | C, D | x | (See DTC U3003:17 (BLIND SPOT MONITORING (BSM) CONTROL MODULE) .) | ||
|
|||||||||