DTC U3003-04: Instrument Cluster Configuration Error: Notes

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DTC U3003:04 BLIND SPOT MONITORING (BSM) CONTROL MODULE DETECTION CONDITION AND POSSIBLE CAUSE

Description	Instrument Cluster Configuration Error
Detection condition	Instrument cluster configuration error detected.
Fail-safe	Blind spot monitoring (BSM) system is stopped.
Possible cause	NOTE: To correctly write the configuration data sent from the instrument cluster to the blind spot monitoring (BSM) control module to the blind spot monitoring (BSM) control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on). Instrument cluster configuration error Blind spot monitoring (BSM) control module malfunction
System wiring diagram	Not applicable