PID/Data Monitor Table (Auto Leveling Control Module)
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
| PID | Unit/Operation | Data Contents | Module Control Terminal |
|---|---|---|---|
| H/L_BO_L | OK/NG | Displays the headlight LO (LH) open circuit detection status. (Detects during low beam on) | I |
| H/L_BO_R | OK/NG | Displays the headlight LO (RH) open circuit detection status. (Detects during low beam on) | Z |
| R_HGT_S | V | Displays voltage at auto leveling sensor | F, J, T |
| R_HGT_S_INI | V | Displays voltage at headlight auto leveling system initial setting | F, J, T |
| VPWR_IG | V | Displays auto leveling control module power supply voltage | A, C |
| VSPD | KPH, MPH | Displays vehicle speed | AB, AD |