September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Using M-MDS
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the BCM.
- Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Three-Flash Turn Signal |
The turn light system can be switched between operable and inoperable. |
On |
Off/On |
BCM |