DTC Table
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
x: Applicable-: Not applicable
DTC DESCRIPTION (AUTO LEVELING CONTROL MODULE (US))
| DTC | System malfunction location | Exterior light warning light | Fail-safe | Drive cycle | Self test type(1) | Memory function | Reference | ||
|---|---|---|---|---|---|---|---|---|---|
| C0061:54 | Acceleration sensor initial position learning not completed | Flashing 2Hz | x | - | D | x | (See DTC C0061:54 (AUTO LEVELING CONTROL MODULE) .) | ||
| C0061:96 | Acceleration sensor malfunction | ON | x | - | D | x | (See DTC C0061:96 (AUTO LEVELING CONTROL MODULE) .) | ||
| U0001:88 | Unit communication error (HS-CAN) | ON | x | - | C, D | x | (See DTC U0001:88 (AUTO LEVELING CONTROL MODULE) .) | ||
| U0122:87 | Communication error with DSC HU/CM | - | x | - | C, D | x | (See DTC U0122:87 (AUTO LEVELING CONTROL MODULE (US)) .) | ||
| U0416:29 | Error signal received from DSC HU/CM | - | x | - | C, D | x | (See DTC U0416:29 (AUTO LEVELING CONTROL MODULE (US)) .) | ||
| U0416:41 | Error signal received from DSC HU/CM | - | x | - | C, D | x | (See DTC U0416:41 (AUTO LEVELING CONTROL MODULE (US)) .) | ||
| U0416:82 | Error signal received from DSC HU/CM | - | x | - | C, D | x | (See DTC U0416:82 (AUTO LEVELING CONTROL MODULE (US)) .) | ||
| U212A:87 | Communication error with light control module (LH) | - | x | - | C, D | x | (See DTC U212A:87 (AUTO LEVELING CONTROL MODULE) .) | ||
| U212B:87 | Communication error with body control module (BCM) | - | x | - | C, D | x | (See DTC U212B:87 (AUTO LEVELING CONTROL MODULE) .) | ||
| U212D:87 | Communication error with light control module (RH) | - | x | - | C, D | x | (See DTC U212D:87 (AUTO LEVELING CONTROL MODULE) .) | ||
| U2300:54 | Configuration data not received from body control module (BCM) | - | x | - | C, D | x | (See DTC U2300:54 (AUTO LEVELING CONTROL MODULE) .) | ||
| U2300:55 | Body control module (BCM) configuration not implemented | - | x | - | C, D | x | (See DTC U2300:55 (AUTO LEVELING CONTROL MODULE) .) | ||
| U2300:56 | Configuration data unmatched with body control module (BCM) | ON | x | - | C, D | x | (See DTC U2300:56 (AUTO LEVELING CONTROL MODULE) .) | ||
| U250A:86 | Error signal received from light control module (LH) | - | x | - | C, D | x | (See DTC U250A:86 (AUTO LEVELING CONTROL MODULE) .) | ||
| U250D:86 | Error signal received from light control module (RH) | - | x | - | C, D | x | (See DTC U250D:86 (AUTO LEVELING CONTROL MODULE) .) | ||
| U3000:42 | Auto leveling control module internal malfunction | ON | x | - | C, D | x | (See DTC U3000:42 (AUTO LEVELING CONTROL MODULE) .) | ||
| U3003:16 | Auto leveling control module low power supply voltage input | - | x | - | C, D | x | (See DTC U3003:16 (AUTO LEVELING CONTROL MODULE (US)) .) | ||
| U3003:17 | Auto leveling control module high power supply voltage input | - | x | - | C, D | x | (See DTC U3003:17 (AUTO LEVELING CONTROL MODULE (US)) .) | ||
|
|||||||||