PID/Data Monitor Table
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
-: Not applicable
PID/DATA MONITOR REFERENCE (AUTO LEVELING CONTROL MODULE)
| PID | Unit/Operation | Data contents | Module control terminal |
|---|---|---|---|
| ACC_SEN_TEMP | °C, °F | Displays acceleration sensor temperature. | - |
| ACC_SEN_TEMP_INIT | °C, °F | Displays acceleration sensor temperature when auto leveling control module is initialized. | - |
| ACC_X | mG | Displays current acceleration value (X-axis). | - |
| ACC_X_INIT | mG | Displays acceleration value (X-axis) when auto leveling control module is initialized. | - |
| ACC_Y | mG | Displays current acceleration value (Y-axis). | - |
| ACC_Y_INIT | mG | Displays acceleration value (Y-axis) when auto leveling control module is initialized. | - |
| ACC_Z | mG | Displays current acceleration value (Z-axis). | - |
| ACC_Z_INIT | mG | Displays acceleration value (X-axis) when auto leveling control module is initialized. | - |
| H/L_STAT | OFF/DRL ON/TNS ON/Headlight Lo ON/Headlight Hi ON |
|
E, H |
| HORZ_STAT | Not horizontally/horizontally | Displays status of horizontal. | - |
| LVL_TGT_ANG | ° (deg) | Displays target angle of leveling control. | D |
| PITCH | ° (deg) | Displays calculated pitch angle. | - |
| PITCH_INIT | ° (deg) | Displays calculated pitch angle when auto leveling control module is initialized. | - |
| VPWR | V | Displays auto leveling control module power supply voltage. | J |
| VSS | km/h | Vehicle speed is displayed. | E, H |