| DTC |
C0061:54, C0062:54, C0063:54 |
DSC HU/Control Module system (unperformed initialization procedure) |
| DETECTION CONDITION |
- C0061:54
- DSC HU/Control Module detects that the initialization procedure has not been performed. (Lateral acceleration sensor)
- C0062:54
- DSC HU/Control Module detects that the initialization procedure has not been performed. (Longitudinal acceleration sensor)
- C0063:54
- DSC HU/Control Module detects that the initialization procedure has not been performed. (Yaw rate sensor)
|
| FAIL-SAFE FUNCTION |
Refer to "DTC Table" and "Fail-safe Function Malfunction Contents". (See DTC TABLE [DSC HU/Control Module] .) |
| POSSIBLE CAUSE |
- Initialization procedure for the lateral acceleration sensor, longitudinal acceleration sensor or yaw rate sensor not performed
- SAS control module malfunction
- DSC HU/Control Module malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |