PID/Data Monitor Table [Power Liftgate (PLG) Control Module]

-: Not applicable

PID/DATA MONITOR ITEM REFERENCE

PID	Unit/Operation	Data contents	Module control terminal
BG_ST	DEAD/INITIAL/PRE ARMING/ARMING/ARMING SB/ALARM/ALARMSB	DEAD: Ignition is in ACC or ON (engine off) and alarm cannot be activated. INITIAL: Ignition is switched OFF and transition to arming stand-by status is possible. PRE ARMING Transition period to arming status. ARMING: Alarm can be activated by inputting alarm trigger. ARMINGSB: Liftgate is open under arming status. ALARM: Alarm trigger is input and alarm is activated. ALARM SB: After alarm activation finished, standing by for next alarm trigger input.	1A (CAN_L) 1B (CAN H)
CLM_CL_CV	Off/On	Off: Liftgate lock actuator close is not operating. On: Liftgate lock actuator close is operating.	2G (Closure motor (Open)) 2J (Closure motor (Closed))
CLM_CL_V	V	Displays the voltage during a close operation of the liftgate lock actuator.	-
CLM_CUR	A	Displays the current during liftgate lock actuator operation.	2G (Closure motor (Open)) 2J (Closure motor (Closed)
CLM_OP_CV	Off/On	Off: Liftgate lock actuator open is not operating. On: Liftgate lock actuator open is operating.	2G (Closure motor (Open)) 2J (Closure motor (Closed))
CLM_OP_V	V	Displays the voltage during a open operation of the liftgate lock actuator.	-
CTS_SW	Off/On	Off: Liftgate is closed. (Liftgate latch switch is off.) On: Liftgate is open. (Liftgate latch switch is on.)	1S (Liftgate condition)
DL_ST	Lock/Unlock	Lock: Door/lift gate is locked. Unlock: Door/lift gate is unlocked	1A (CAN_L) 1B (CAN_H)
FL_SW	Off/On	Off: Full latch switch is off. On: Full latch switch is on.	1O (Full latch switch)
GT_SW	Off/On	Off: Power liftgate (PLG) rear switch is not pressed. On: Power liftgate (PLG) rear switch is pressed.	1AF (Power liftgate (PLG) rear switch signal)
HAND_SW	Off/On	Off: Liftgate opener switch is not pressed. On: Liftgate opener switch is pressed.	1Z (Liftgate opener switch signal)
HL_SW	Off/On	Off: Half latch switch is off. On: Half latch switch is on.	1Q (Half latch switch)
IG_STATUS	Off/On	Off: Ignition is switched to ACC or OFF. On: Ignition is switched ON (engine off or on).	1AD (Power supply)
I-Stop_ENG ST	Ready/Cranking/Running/IS_Cond/IS_Stopping/IS_Stoped/IS_Rest art/IS_Restarting/IS_Running	NOTE: Displays in the M-MDS but it does not operate.
LL_SW_D	Lock/Unlock	Lock: Front door lock-link switch (LH) is in lock. Unlock: Front door lock-link switch (LH) is in unlock.	1A (CAN_L) 1B (CAN_H)
LL_SW_D_LK	Off/On	Off: Front door lock-link switch (LH) is in unlock. On: Front door lock-link switch (LH) is in lock.	1U (Door lock (driver-side))
LL_SW_D_UNL	Off/On	Off: Front door lock-link switch (LH) is in lock. On: Front door lock-link switch (LH) is in unlock.	1V (Door unlock (driver-side))
LL_SW_P	Lock/Unlock	Lock: Front door lock-link switch (RH) is in lock. Unlock: Front door lock-link switch (RH) is in unlock.	1A (CAN_L) 1B (CAN_H)
LL_SW_P_UNL	Off/On	Off: Front door lock-link switch (RH), rear door lock-link switch (LH), rear door lock-link switch (RH) is in unlock. On: Front door lock-link switch (RH), rear door lock-link switch (LH), rear door lock-link switch (RH) is in lock.	1X (Door unlock (passenger-side and rear))
M_CL_CV_L	Off/On	Off: Power liftgate (PLG) drive unit motor (LH) close is not operating. On: Power liftgate (PLG) drive unit motor (LH) close is operating.	2A (Liftgate open signal) 2C (Liftgate close signal)
M_CL_CV_R	Off/On	Off: Power liftgate (PLG) drive} unit motor (RH) close is not operating. On: Power liftgate (PLG) drive unit motor (RH) close is operating.	2B (Liftgate close signal) 2E (Liftgate open signal)
M_CL_L	V	Displays the voltage during a close operation of the power liftgate (PLG) drive unit motor (LH).	-
M_CL_R	V	Displays the voltage during a close operation of the power liftgate (PLG)} drive unit motor (RH).	-
M_CNT_L	-	Displays the power liftgate (PLG) drive unit motor (LH) speed.	1H (Hall effect switch No. 1) 1J (Hall effect switch No. 2)
M_CNT_R		Displays the power liftgate (PLG)} drive unit motor (RH) speed.	1G (Hall effect switch No. 1) 1I (Hall effect switch No. 2)
M_OP_CV_L	Off/On	Off: Power liftgate (PLG) drive unit motor (LH) open is not operating. On: Power liftgate (PLG) drive unit motor (LH) open is operating.	2A (Liftgate open signal) 2C (Liftgate close signal)
M_OP_CV_R	Off/On	Off: Power liftgate (PLG) drive unit motor (RH) close is not operating. On: Power liftgate (PLG) drive unit motor (RH) close is operating.	2B (Liftgate close signal) 2E (Liftgate open signal)
M_OP_L	V	Displays the current during a close operation of the power liftgate (PLG) drive unit motor (LH).	-
M_OP_R	V	Displays the current during a close operation of the power liftgate (PLG) drive unit motor (RH).	-
M_SEN_A_L	Low/High	Low: Hall effect switch 2 (LH) pulse position is at LOW. High: Hall effect switch 2 (LH) pulse position is at HI	1J (Hall effect switch No. 2)
M_SEN_A_R	Low/High	Low: Hall effect switch 2 (RH) pulse position is at LOW. High: Hall effect switch 2 (RH) pulse position is at HI	1I (Hall effect switch No. 2)
M_SEN_B_L	Low/High	Low: Hall effect switch 1 (LH) pulse position is at LOW. High: Hall effect switch 1 (LH) pulse position is at HI	1H (Hall effect switch No. 1)
M_SEN_B_R	Low/High	Low: Hall effect switch 1 (RH) pulse position is at LOW. High: Hall effect switch 1 (RH) pulse position is at HI	1G (Hall effect switch No. 1)
PB_STAT	Off/On/Reserved/Unknown	Off: Electric parking brake switch is pressed. On: Electric parking brake switch is pulled up. Reserved: - Unknown: Electric parking brake switch signal is not determined.	1A (CAN_L) 1B (CAN_H)
PC_STAT	IG OFF/ACC/IG ON/CRANK	IG OFF: Ignition is switched to OFF. ACC: Ignition is switched} to ACC. IG ON: Ignition is switched ON (engine off or on). CRANK: During engine cranking.	1A (CAN_L) 1B (CAN_H)
PLG_KEY	Off/Open	Off: Power liftgate button of the remote transmitter is not pressed. Open: Power liftgate button of the remote transmitter is pressed.	1A (CAN_L) 1B (CAN_H)
PLG_M_L	A	Displays the current during power liftgate (PLG) drive unit motor (LH) operation.	2A (Liftgate open signal) 2C (Liftgate close signal)
PLG_M_R	A	Displays the current during power liftgate (PLG) drive unit motor (RH) operation.	2B (Liftgate close signal) 2E (Liftgate open signal)
PLG_SW_D	Off/On	Off: Power liftgate (PLG) front switch is not pressed. On: Power liftgate (PLG) front switch is pressed.	1Y (Power liftgate (PLG) front switch signal (Input))
PLG_TRNS_OP	Off/Open	Off: Open signal is not received from remote transmitter. (Power liftgate button of the remote transmitter is not pressed.) Open: Open signal is received from remote transmitter. (Power liftgate button of the remote transmitter is pressed.)	1A (CAN_L) 1B (CAN_H)
PLG_TRNS_SP	Off/Stop	Off: Stop signal is not} received from remote transmitter. (Power liftgate button of the remote transmitter is not pressed.) Open: Stop signal is received from remote transmitter. (Power liftgate button of the remote transmitter is pressed.)	1A (CAN_L) 1B (CAN_H)
RET_SW	Off/On	Off: Return switch is off. On: Return switch is on.	1T (Motor return signal)
SHIFT	P/R/N/D/S (2)/L (1)	Selector lever position signal from PCM P: Selector lever is in P position. R: Selector lever is in R position. N: Selector lever is in N position. D: Selector lever is in D position. S (2): Selector lever is in D position 2nd gear. L (1): Selector lever is in D position 1st gear.	1A (CAN_L) 1B (CAN_H)
T_SEN_L	V	Displays voltage at the power liftgate (PLG) touch sensor (LH)	1N (Power liftgate (PLG) touch sensor} signal (LH))
T_SEN_R	V	Displays voltage at the power liftgate (PLG) touch sensor (RH)	1P (Power liftgate (PLG) touch sensor signal (RH))
VPWR_B	V	Displays voltage at the power supply	1AA (Power supply) 2I (Power supply)
VSS	KPH, MPH	Displays the vehicle speed signal from the PCM.	1A (CAN_L) 1B (CAN_H)