| BLIND SPOT MONITORING (BSM) WARNING LIGHT FLASHES WHILE NOT UNDER BLIND SPOT MONITORING (BSM) WARNING LIGHT-FLASHING CONDITIONS (NO LIGHT SWITCH OPERATION (TURN SIGNAL SWITCH)) |
- The blind spot monitoring (BSM) warning light flashes despite not satisfying the blind spot monitoring (BSM) warning light flashing conditions (vehicle speed above 10 km/h {6.3 mph} or more, turn signal on, and vehicle in warning zone).
- The blind spot monitoring (BSM) warning light flashes, but the turn signals are off.
- Both blind spot monitoring (BSM) warning light flashes under conditions other than the RCTA activation conditions (selector lever is in R position and target vehicle detection).
|
| BLIND SPOT MONITORING (BSM) WARNING LIGHT ILLUMINATES WHILE NOT UNDER LIGHT-ILLUMINATION CONDITIONS |
- The blind spot monitoring (BSM) warning light illuminates, but the conditions to illuminate the blind spot monitoring (BSM) warning light are not satisfied (vehicle speed above 10 km/h {6.3 mph} or more, turn signals off, and vehicle in warning zone).
|
| BLIND SPOT MONITORING (BSM) WARNING LIGHT DOES NOT ILLUMINATE WHILE UNDER BLIND SPOT MONITORING (BSM) WARNING LIGHT-ILLUMINATION CONDITIONS |
- The blind spot monitoring (BSM) warning light does not illuminate despite satisfying the conditions to illuminate the blind spot monitoring (BSM) warning light (vehicle speed above 10 km/h {6.3 mph} or more, turn signals off, and vehicle in warning zone).
|
| BLIND SPOT MONITORING (BSM) WARNING LIGHT DOES NOT FLASH WHILE UNDER BLIND SPOT MONITORING (BSM) WARNING LIGHT-FLASHING CONDITIONS (WITH LIGHT SWITCH OPERATION (TURN SIGNAL SWITCH)) |
- The blind spot monitoring (BSM) warning light does not flash or illuminate continuously, but the conditions to flash the blind spot monitoring (BSM) warning light are satisfied (vehicle speed above 10 km/h {6.3 mph} or more, turn signal on, and vehicle in warning zone).
- Both blind spot monitoring (BSM) warning light does not flash under conditions even through under the RCTA activation conditions (selector lever is in R position and target vehicle detection).
- Blind spot monitoring (BSM) warning light does not flash or illuminate continuously, but turn signals are off.
|
| THE BLIND SPOT MONITORING (BSM) WARNING LIGHT DOES NOT FLASH OR ILLUMINATE CONTINUOUSLY, BUT A TURN SIGNAL IS ON |
- Blind spot monitoring (BSM) warning alarm sounds but blind spot monitoring (BSM) warning light does not flash.
- Blind spot monitoring (BSM) warning alarm is triggered on side opposite to the direction in which turn signal is operated.
|
| BLIND SPOT MONITORING (BSM) WARNING ALARM DOES NOT SOUND WHILE BLIND SPOT MONITORING (BSM) WARNING LIGHT FLASHES |
- The blind spot monitoring (BSM) control module recognizes that vehicle is in warning zone on side in which turn signal is operated, but blind spot monitoring (BSM) warning alarm does not sound despite blind spot monitoring (BSM) warning light flashing.
|
| BLIND SPOT MONITORING (BSM) SYSTEM CANNOT DETECT VEHICLE |
- The blind spot monitoring (BSM) system cannot detect vehicle.
|