With auto-open/close function for all windows

NOTE:

Perform the following inspection for the power window main switch and the power window subswitches for each window.

AUTOMATIC OPEN/CLOSE FUNCTION INSPECTION AND ACTION - WITH AUTO-OPEN/CLOSE FUNCTION FOR ALL WINDOWS

Step	INSPECTION		Action
1	Switch the ignition ON (engine off or on). Operate the each power window switch in auto open/close function. Does the each door glass move up and down in auto open/close function?	Yes	Go to the next step.
1		No	Door glass does not move up and down in auto open/close function: Go to Step 1 of "Door glass does not move up and down in automatic mode" troubleshooting procedure. (See DOOR GLASS DOES NOT MOVE UP AND DOWN IN AUTOMATIC MODE .) Door glass moves up and down in auto open/close function, but door glass reverses: Go to Step 1 of "Door glass reverses even though the glass does not encounter a foreign object while it is moving up in automatic mode" troubleshooting procedure. (See DOOR GLASS REVERSES EVEN THOUGH THE GLASS DOES NOT ENCOUNTER A FOREIGN OBJECT WHILE IT IS MOVING UP IN AUTOMATIC MODE .)
2	Gently pull the each power window switch while the door glass is moving down in auto open/close function. Does the glass stop?	Yes	Go to the next step.
2		No	Replace the suspected power window switch, then go to the automatic door glass return function inspection.
3	Gently press the each power window switch while the door glass is moving up in auto open/close function. Does the glass stop?	Yes	Auto open/close function is normal. Perform IG OFF timer function inspection.
3		No	Replace the suspected power window switch, then go to the automatic door glass return function inspection.