DTC C101F-98: Overheat Protection Control [DSC HU/Cm]: Notes

DTC C101F:98 (DSC HU/CM) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C101F:98	Overheat protection control
DETECTION CONDITION		Pump motor, traction control solenoid valve and stability control solenoid valve is forcibly operated for 30 s or more is detected. Inlet solenoid valve is forcibly operated for 120 s or more and outlet solenoid valve is forcibly operated for 30 s or more is detected.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [DSC HU/CM] .)
POSSIBLE CAUSE		Overheating protection control is performed to protect solenoid valve inside DSC HU/CM, however, this is not a malfunction
SYSTEM WIRING DIAGRAM		Not applicable