DTC B10A4-86; Communication Error With Swivel Actuator (RH): Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION & POSSIBLE CAUSE
| Description |
Communication error with swivel actuator (RH) |
| Detection condition |
- Adaptive front lighting system (AFS) control module could not receive the signal from the swivel actuator (RH) with the ignition switched ON (engine off or on).
|
| Fail-safe |
- The swivel actuator (RH) is stopped at the position when the malfunction is determined.
- The swivel actuator (LH) is moved to the center.
- Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned -0.6° from where the malfunction is determined.
|
| Possible cause |
- Swivel actuator (RH) malfunction
- Adaptive front lighting system (AFS) control module malfunction
|
| System wiring diagram |
Not applicable |