LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> CX-9 Touring, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Drive Selection System >> Drive Selection Switch Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Drive Selection Switch Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the drive selection switch. (See CRUISE CONTROL SWITCH REMOVAL/INSTALLATION )
  3. Measure the resistance between drive selection switch terminals B and C under the following conditions.

    Resistance when drive selection switch pressed to - side (backward) and held 

    • 0 ohms

    Resistance when drive selection switch pressed to SPORT side (forward) and held 

    • 465.3-474.7 ohms

    Resistance when any switch not pressed 

    • 2643.3-2696.7 ohms
    G12245179Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals