DTC U2300-54: Configuration Data Not Received From Instrument Cluster [Retractable Hardtop Control Module]: Notes
DTC U2300:54 (RETRACTABLE HARDTOP CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Configuration data not received from instrument cluster |
| Detection condition |
- The retractable hardtop control module cannot receive configuration data from the instrument cluster with the ignition switched ON (engine off or on).
|
| Fail-safe |
- Stops retractable hardtop operation
|
| Possible cause |
NOTE:
- To correctly write the configuration data, sent from the instrument cluster to the retractable hardtop control module, to the retractable hardtop control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- DTCs are stored in the instrument cluster.
- Instrument cluster configuration not performed
- Instrument cluster internal memory malfunction
- Retractable hardtop control module malfunction
|
| System wiring diagram |
Not applicable |