DTC B10A3-87: Communication Error With Swivel Actuator (LH) 1 [Adaptive Front Lighting System (AFS) Control Module]: Outline
WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC B10A3:87 [ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Communication error with swivel actuator (LH) 1 |
| Detection condition |
- The adaptive front lighting system (AFS) control module cannot receive the signal from the swivel actuator (LH).
|
| Fail-safe |
- The swivel actuator (LH) is moved to the center or stopped at the position when the malfunction is determined.
- The swivel actuator (RH) is moved to the center.
- Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned -0.65° from where the malfunction is determined.
|
| Possible cause |
- Front combination light (LH) connector or terminal malfunction
- Adaptive front lighting system (AFS) control module connector or terminal malfunction
- Short to ground in swivel actuator (LH) LIN communication line
- Short to power supply in swivel actuator (LH) LIN communication line
- Open circuit in swivel actuator (LH) LIN communication line
- Swivel actuator (LH) malfunction
- Adaptive front lighting system (AFS) control module malfunction
|
 Courtesy of MAZDA MOTORS CORP.
|