LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2022 >> 3 Premium, 4D Hatchback, FWD, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control (Service Information) >> Front Abs Wheel-Speed Sensor Removal/Installation >> Front ABS Wheel-speed Sensor Wiring Harness and Clip Disconnection Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front ABS Wheel-speed Sensor Wiring Harness and Clip Disconnection Note

NOTE:
  • Refer to this note only if the disconnection of the front ABS wheel-speed sensor wiring harness and the clip shown in the figure is required.
  1. Remove the front ABS wheel-speed sensor wiring harness and clip as shown in the figure.
    G13176291Courtesy of MAZDA MOTORS CORP.
  2. Remove the front ABS wheel-speed sensor wiring harness and clip as shown in the figure.
    G13176292Courtesy of MAZDA MOTORS CORP.