Tie-rod End Assembly Note

Align the marks that were made before removing the tie-rod end, and assemble the tie-rod end to the tie rod.

Fig 1: Tie-Rod End Assembly Bolts With Torque Specification
Courtesy of MAZDA MOTORS CORP.
NOTE:
- When newly replacing a tie-rod end, place alignment marks on the new part in the same position as the remove tie-rod end.
Courtesy of MAZDA MOTORS CORP.
Verify that dimension A shown in the figure is within the specification.

Courtesy of MAZDA MOTORS CORP.

Specification

54-67 mm {2.2-2.6 in}
- If not within the specification, make adjustments so that dimension A is within the specification.