With 360°View Monitor System: Outline

DTC B14F7:55 (VEHICLE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE - WITH 360°VIEW MONITOR SYSTEM

System malfunction location	Body control module (BCM) configuration not performed
Detection condition	The vehicle control module (VCM) detects that the 360° view monitor control module received a signal which indicates the body control module (BCM) configuration was not performed for 10 s.
Fail-safe	(See DTC TABLE: [VEHICLE CONTROL MODULE (US)] .)
Possible cause	Malfunction in CAN communication line between body control module (BCM) and 360° view monitor control module Inappropriate 360° view monitor control module replacement procedure Configuration data of body control module (BCM) and 360° view monitor control module is not matched Body control module (BCM) configuration data write error Configuration not completed after 360° view monitor control module replacement 360° view monitor control module malfunction Body control module (BCM) malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable