DTC C0063-54: Yaw Rate Initial Setting For Vehicle Control Module (VCM) Not Implemented [Vehicle Control Module]: Outline
DTC C0063:54 (VEHICLE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Yaw rate initial setting for vehicle control module (VCM) not implemented |
| Detection condition |
- The vehicle control module (VCM) detects that the yaw rate initial setting was not implemented for 50 s.
|
| Fail-safe |
(See DTC TABLE: [VEHICLE CONTROL MODULE (US)] .) |
| Possible cause |
- Malfunction in CAN communication line between vehicle control module (VCM) and Sophisticated Airbag Sensor (SAS) control module
- Inappropriate Sophisticated Airbag Sensor (SAS) control module replacement procedure
- Inappropriate body control module (BCM) replacement procedure
- Yaw rate initial setting for vehicle control module (VCM) not implemented
- Sophisticated Airbag Sensor (SAS) control module malfunction
- Vehicle control module (VCM) malfunction (built into body control module (BCM))
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |