DTC C1A67-54: Front Radar Sensor Aiming Adjustment Not Implemented [Vehicle Control Module]: Outline

DTC C1A67:54 (VEHICLE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Front radar sensor aiming adjustment not implemented
Detection condition	The vehicle control module (VCM) detects that the front radar sensor aiming adjustment was not implemented.
Fail-safe	(See DTC TABLE: [VEHICLE CONTROL MODULE (US)] .)
Possible cause	Front radar sensor aiming adjustment malfunction (aiming adjustment not implemented) Front radar sensor malfunction Vehicle control module (VCM) malfunction (built into body control module (BCM)) Front radar sensor which was used on a different vehicle is installed. NOTE: If the ignition is switched OFF in the middle of aiming, the front radar sensor may detect a DTC even if the front radar sensor power supply voltage is stable.
System wiring diagram	Not applicable
Connector diagram	Not applicable