LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2022 >> CX-30 Select >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> On-Board Diagnostic - Vehicle Control Module (4 Of 4) >> DTC U3000-05: Vehicle Control Module (VCM) Internal Malfunction [Vehicle Control Module] >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

DTC U3000:05 (VEHICLE CONTROL MODULE) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 INSPECT VEHICLE CONTROL MODULE (VCM) FOR MALFUNCTION
  • Clear the DTC recorded in the memory.

    (See CLEARING DTC .)

  • Perform the DTC inspection for the vehicle control module (VCM).

    (See DTC INSPECTION .)

  • Is the same Pending DTC present?
 Yes Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)] .)
If the CAN communication is normal, replace the body control module (BCM), then go to the next step.
(See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION [(US)] .)
No Go to the next step.
Repair completion verification VERIFY IF OTHER DTC IS DISPLAYED
  • Perform the DTC inspection.
  • Are any other DTCs displayed?
 Yes Repair the malfunctioning location according to the applicable DTC troubleshooting.
No DTC troubleshooting completed.
(See DTC INSPECTION .)
scientia non olet · About LEMON Manuals