Diagnostic Procedure
DTC U0447:86 [REAR ONE-TOUCH WALK-IN CONTROL MODULE] DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY REAR ONE-TOUCH WALK-IN CONTROL MODULE DTCs
|
Yes | Go to the next step. |
| No | Go to Step 5. | ||
| 2 | VERIFY INSTRUMENT CLUSTER DTCs
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [INSTRUMENT CLUSTER] .) |
| No | Go to the next step. | ||
| 3 | INSPECT INSTRUMENT CLUSTER
|
Yes | Go to the next step. |
| No | Replace the instrument cluster, then go to the next step. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .) |
||
| 4 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Repeat the inspection from Step 1.
(See REAR ONE-TOUCH WALK-IN CONTROL MODULE REMOVAL/INSTALLATION .) Go to the next step. |
| No | Go to the next step. | ||
| 5 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [REAR ONE-TOUCH WALK-IN CONTROL MODULE] .) |
| No | DTC troubleshooting completed. | ||