Without Mazda M Hybrid: Outline
DTC U0416:41 (ADAPTIVE LED HEADLIGHTS CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from DSC HU/Control Module |
| Detection condition |
- The adaptive LED headlights control module received error signal (sum error) from the DSC HU/Control Module.
|
| Fail-safe |
- Perform the following controls with the adaptive LED headlights turned on.
- Turn off glare-free high beam.
- Set wide-range low beam as basic light distribution.
- The headlight leveling actuator is stopped at the position when the malfunction is determined.
|
| Possible cause |
- DSC HU/Control Module malfunction
- Adaptive LED headlights control module malfunction
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |