DTC C0063-54: Yaw Rate Initial Setting For Vehicle Control Module (VCM) Not Implemented [Vehicle Control Module]: Outline

DTC C0063:54 (VEHICLE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Yaw rate initial setting for vehicle control module (VCM) not implemented
Detection condition	The vehicle control module (VCM) detects that the yaw rate initial setting was not implemented for 50 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
Possible cause	Malfunction in CAN communication line between vehicle control module (VCM) and SAS control module Inappropriate SAS control module replacement procedure Inappropriate body control module (BCM) replacement procedure Yaw rate initial setting for vehicle control module (VCM) not implemented SAS control module malfunction Vehicle control module (VCM) malfunction (built into body control module (BCM))
System wiring diagram	Not applicable
Connector diagram	Not applicable