LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> 3 Select, 4D Hatchback >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> On-Board Diagnostic - Dynamic Stability Control (2 Of 2) >> DTC U3000-04: DSC HU/Control Module (Internal Malfunction) [DSC HU/Control Module] >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

DTC U3000:04 (DSC HU/Control Module) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 INSPECT DSC HU/Control Module FOR MALFUNCTION DEPENDING ON REPEATABILITY 
  • Clear the DTC recorded in the memory.

    (See CLEARING DTC .)

  • Perform the DTC inspection for the DSC HU/Control Module. (See DTC INSPECTION .)
  • Is the same Pending DTC present?
 Yes Refer to the CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW to inspect for a CAN communication error.
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(US)] .)
If the CAN communication is normal, replace the DSC HU/Control Module and perform the repair completion verification.
(See DSC HU/Control Module REMOVAL/INSTALLATION [L.H.D. (US)] .)
No Go to the next step.
Repair completion verification VERIFY IF OTHER DTCs DISPLAYED 
  • Perform the DTC inspection. (See DTC INSPECTION .)
  • Are any DTCs displayed?
 Yes Repair the malfunctioning location according to the applicable DTC troubleshooting.
No DTC troubleshooting completed.
scientia non olet · About LEMON Manuals