Connected device information verification
- Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
- Select in the following order from the diagnostic assist function initial screen.
- [Service Information]
- [Connected Device Information]
- Select the applicable connected device and verify the connected device information.CONNECTED DEVICE INFORMATION
Indication on center display Connected device Indicated information (*: Applicable, -: Not applicable) Manufacturer name Software version Part number Serial number Sirius XM serial number In-vehicle Digital Owner's Manual version CMU Audio control unit (ACU) X X X X - X DISP Center display X X X X - - RSES Displays on the center display, but does not operate. MIC Microphone X X X X - - TCU (1) Mazda EMERGENCY ASSISTANCE control module X X X X - - DSRC Displays on the center display, but only functions if a Mazda genuine part (accessory) is equipped. COMMANDER Commander switch (1) Vehicles with Mazda EMERGENCY ASSISTANCE - Ends the diagnostic assist function. (See ENDING PROCEDURE .)