LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-30 S >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN M) >> Fuel Tank Pressure Sensor Removal/Installation >> With EGR cooler
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

With EGR cooler

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the main silencer. (See EXHAUST SYSTEM REMOVAL/INSTALLATION .)
  3. Remove the insulator (rear). (See EXHAUST SYSTEM REMOVAL/INSTALLATION .)
  4. Disconnect the quick release connector shown in the figure while lowering the charcoal canister (main) component. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION .)
    G15654607Courtesy of MAZDA MOTORS CORP.
  5. Temporarily install the charcoal canister (main) bracket.
  6. Remove in the order indicated in the table.
    Fig 1: Fuel Tank Pressure Sensor Components Location With Torque Specification
    G15654608Courtesy of MAZDA MOTORS CORP.
    FUEL TANK PRESSURE SENSOR COMPONENT OPERATIONS

    Component No. Refer to
    1 Fuel tank pressure sensor connector
    2 Quick release connector
    (See QUICK RELEASE CONNECTOR (FUEL SYSTEM) REMOVAL/INSTALLATION .)
    3 Evaporative hose
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals