October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Oil Data Reset Procedure (Without Center Display)
ENGINE OIL DATA RESET PROCEDURE (WITHOUT CENTER DISPLAY)
| Step |
Inspection |
Results |
Action |
Note |
| 1 |
- Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition.
- Is the engine oil maintenance monitor function on?
|
Yes |
Go to the next step. |
If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset. |
| No |
The engine oil data reset is unnecessary. |
| 2 |
- Switch the ignition OFF (LOCK).
- Press and hold the tripmeter switch with the ignition switched off, then switch the ignition ON (engine off).
- Keep pressing the tripmeter switch for more than 5 s.
- Does the master warning light flash for a few seconds?
|
Yes |
Engine oil data reset is completed. |
The master warning light flashes for a few seconds when the engine oil data reset procedure is completed. |
| No |
Perform Step 2 again. |