LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-5 Turbo >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Windshield Removal >> Not Reusing Windshield
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Not Reusing Windshield

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Sensor cover (with sensor cover)

      (See SENSOR COVER REMOVAL/INSTALLATION .)

    4. Forward sensing camera (FSC) (with forward sensing camera (FSC))

      (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)

    5. Rain sensor (with auto light/wiper system)

      (See RAIN SENSOR REMOVAL/INSTALLATION .)

    6. Rearview mirror (without auto-dimming rearview mirror)

      (See REARVIEW MIRROR REMOVAL/INSTALLATION .)

    7. Auto-dimming rearview mirror (with auto-dimming rearview mirror)

      (See AUTO-DIMMING REARVIEW MIRROR REMOVAL/INSTALLATION .)

    8. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
    9. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION .)
    10. Front map light (See FRONT MAP LIGHT REMOVAL/INSTALLATION .)
    11. Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION .)
  3. Set the headliner aside.
  4. Disconnect the windshield wiper de-icer connector. (with windshield wiper de-icer)
    G13114321Courtesy of MAZDA MOTORS CORP.
  5. Remove the wiring harness clip. (with windshield wiper de-icer)
  6. Apply protective tape along the edge of the body.
    G13114322Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • Overlap and apply the protective tape to the corners to prevent damage to the body.
  7. Remove the windshield molding by pulling it outward.
    NOTE:
    • If the windshield molding is difficult to remove, warm the windshield molding using a hot air blower.
    G13114323Courtesy of MAZDA MOTORS CORP.
  8. Cut the sealant around the windshield using a sealant remover.
    NOTE:
    • If it is difficult to cut the sealant, use piano wire and follow the procedure under "Reusing Windshield".
    G13114331Courtesy of MAZDA MOTORS CORP.
  9. Remove the windshield.
scientia non olet · About LEMON Manuals